Important Safeguards and Warnings
1. Electrical Safety
All installation and operation here should conform to your local electrical safety codes. We assume no liability
or responsibility for all the fires or electrical shock caused by improper handling or installation.
2. Transportation security
Heavy stress, violent vibration or water splash are not allowed during transportation, storage and installation.
3. Installation
Keep upwards. Handle with care.
Do not apply power to the NVR before completing installation.
Do not place objects on the NVR
4. Qualified engineers needed
All the examination and repair work should be done by the qualified service engineers. We are not liable for
any problems caused by unauthorized modifications or attempted repair.
5. Environment
The NVR should be installed in a cool, dry place away from direct sunlight, inflammable, explosive substances
and etc. This series product shall be transported, storage and used in the environment ranging from 0
0
C to 50
0
C
6. Accessories
Be sure to use all the accessories recommended by manufacturer.
Before installation, please open the package and check all the components are included.
Contact your local retailer ASAP if something is broken in your package.
7. Lithium battery
Improper battery use may result in fire, explosion, or personal injury!
When replace the battery, please make sure you are using the same model!
The NVRs are not password protected when unboxing. You must change this default
account settings to better protect against security risks, such as the unauthorized access
by others to the product that may prevent the product from functioning properly and/or
For your privacy, we strongly recommend changing the password to something of your
own choosing (using a minimum of 8 characters, including upper case letters, lower case
letters, numbers, and special characters) in order to increase the security of your
To Next Page
Loading...
Need help?
General
