1. Products introduction
please read the instructions carefully before proceeding.
The operator contains Extra battery, transformer, control board and radio control.
In case of power of failure, the operator is powered by a 24Vdc, 1.3Ah, extra battery.
Intelligent charging system supplied.
MCU is supplied to control the gate operator.
Keypad / single button interface.
Photo beam safety beam interface.
User can select Auto-close feature
Soft start & soft stop.
Manual key release design for emergency purposes.
Gate operator has auto-reverse function, and the reverse power can change by user.
2. Important safety information
Carefully read and follow all safety precaution and warnings before attempting to install and use this
automatic gate operator.
Make sure the Power supply(AC220V or AC110V) of operator is suitable for the power supply in
your area.
3. Main technical parameters
To Next Page
Loading...
