Switch Selection
Two throttle curves are available and can be selected via a switch
or Flight Mode. Touch the PAGE key until the following page
appears.
Note: If you only want one throttle curve, adjust the desired
mix value in POS 0 and leave all switches in the 0 position.
Two throttle curves are available—Position 0 throttle curve and
Position 1 throttle.
Select the desired switch(es) for position 1 and 0, then touch the
PAGE key. Flip the switch selected to select POS 0 or POS 1 in
order to make adjustments to the desired throttle curve.
Note: Position 1 has priority over Position 0 such that if a
switch or flight mode is assigned to POS 1 and that flight mode or
switch is activated, the Position 1 throttle curve will be in effect.
28
10X MANUAL Airplane
To Next Page
Loading...
Need help?
General
