Need help?Do you have a question about the JR XP7202 and is the answer not in the manual?
General| Brand | JR |
|---|---|
| Model | XP7202 |
| Category | Remote Control |
| Language | English |
Overview of the XP7202 synthesized transmitter, its features, and capabilities.
Details on the R790 receiver and DS821 servo, including their key features.
Technical specifications for the system and the XP7202 transmitter.
Detailed specifications for servos, receivers, and chargers included with the system.
Instructions for charging transmitter and receiver battery packs, including polarity.
Guidance on adjusting control stick length and tension for user comfort.
Essential suggestions for correctly installing JR radio equipment in models.
Steps to select the operating channel and perform a range test before flight.
How to select Airplane mode and configure basic settings like servo reversing.
Procedures for reversing servo direction and adjusting servo travel limits.
Steps to select Helicopter mode and configure basic settings.
Setting up pitch and throttle curves for optimal helicopter performance.
Diagram of controls and introduction to system setup modes.
How to enter and navigate the Function Mode for detailed programming.
Explanation of functions available within the System Setup mode.
Procedure to access various programming functions for model setup.
Accessing a consolidated list of all available programming functions for quick selection.
How to select, manage, and copy stored model configurations.
Procedure for assigning names to stored models for easy identification.
Selecting the appropriate model type (Airplane or Helicopter) for programming.
Choosing the correct radio transmission modulation to match the receiver.
Procedures for resetting model memory to defaults or clearing the integrated timer.
Setting up the trainer function for practice sessions with a second transmitter.
Configuring wing types (Normal, Flaperon, Delta) for aircraft control surface setups.
Procedures for selecting the operating frequency channel using the synthesized system.
Adjusting control throw rates and exponential curves for different flight conditions.
Electronically reversing servo direction and fine-tuning servo centering.
Adjusting the end-point travel limits for each servo channel.
Customizing throttle and pitch curves for optimal performance.
Setting up gyro sensitivity and programming custom mixes.
Overview of helicopter transmitter controls and system setup procedures.
Detailed explanation of function mode operations specific to helicopters.
Important guidelines for servo installation, operation, and general model handling.
A checklist of pre-flight inspections to ensure safe and proper operation.
Information on warranty coverage, terms, and how to obtain assistance or repairs.
To Next Page
