JR XP7202 - Assigning an Offset

57
XP7202 Instruction Manual
Press the Down and Select keys simultaneously to
access the Function Mode.
In Function Mode, use the UP or Down keys to select
the desired PROG. MIX screen. (1-6)
Press the Select key to highlight OFFSET.
To establish the offset position, use the IncreaSe or
DecreaSe
keys to change the value to the desired point.
The stored offset value will appear onscreen.
To change the offset value, simply use the IncreaSe
or DecreaSe keys to change the value. Pressing the
clear button will reset the offset to 0.
Programmable Mixing 1-6 (continued)
Assigning an Offset
[PROG.MIX1]
THRO≥ THRO ON
RATE: 0%
0%
SW:ON
◊OFFSET: 0
Press to enter
Function Mode
Press to enter PROG MIX
Press to adjust value
Press to highlight OFFSET Press to return
value to default