JR XP7202 User Manual

66
XP7202 Instruction Manual
The Model Name function is used to input and assign
the model’s name to a specific memory, allowing easy
identification of each model’s program. Each model’s
name is displayed on the main screen when that model is
selected. Up to eight characters that include numbers and
letters are available.
Press the Down and Select keys simultaneously, then
turn on the transmitter.
Press the IncreaSe or DecreaSe key until the
MODEL NAME screen appears.
Model Name
To Enter the Model Name Function
Press the Select Key to move the cursor to the desired
character’s position.
Press the IncreaSe or DecreaSe key to select the
desired character.
[MODEL NAME
MODEL 1 HELI
PPM <JR-PROPO>
≥
Press to enter main screen
Press to enter MODEL NAME
INCREASE and DECREASE key
To Enter the Copy Function
Press the Down and Select keys simultaneously
and turn the power switch ON to access the System
Setup Mode
Press the UP or Down key until MODEL SELECT
appears on screen.
Press the Select button to enter the COPY screen.
Press the IncreaSe or DecreaSe keys to select the
model that you wish to copy the model to.
Press the clear key to copy the model to the selected
model memory.
NOTE
: Be aware that the model that you copy to
will have its memory replaced with the new model,
and the programming information for that model
will be erased.
[MODEL SELECT]
MODEL 1
ACRO SPCM
MODEL 2
ACRO SPCM
◊COPY
≥
Press to enter main screen
Press to select MODEL SELECT
INCREASE and DECREASE key
Press to copy selected model
Press to enter COPY screen

JR XP7202 Specifications

General

Brand	JR
Model	XP7202
Category	Remote Control
Language	English