JR XP7202 - Section 5.2: Helicopter Quick Start; Helicopter Mode Setup

20
XP7202 Instruction Manual
Section 5.2: Helicopter Quick
Start
The following covers a basic 5-channel mechanical mix
Selection” on Page 46 for specifics on programming flaperons.
helicopter with single rate. For more details on programming for the helicopter mode see the Helicopter section of this
manual.
Selecting Helicopter Mode
Press the Down and Select keys simultaneously
and hold while turning on the transmitter to enter
system set up mode.
Press the UP or Down button until TYPE SELECT
appears on screen.
If HELI is highlighted on screen, proceed to
Servo Reversing.
If ACRO is highlighted, press the IncreaSe or
Model Type Selection
[TYPE SELECT]
MODEL 1
◊HELI
ACRO
Press and hold to enter System Setup
Use to select
TYPE SELECT
Use to select
desired mode
Press to accept model type change