JR XP7202 - Model Name; Entering Model Names

33
XP7202 Instruction Manual
The Model Name function is used to input and assign
the model’s name to a specific memory, allowing easy
identification of each model’s program. Each model’s
name is displayed on the main screen when that model is
selected. Up to eight characters that include numbers and
letters are available.
Press the Down and Select keys simultaneously, then
turn on the transmitter.
Press the IncreaSe or DecreaSe key until the
MODEL NAME screen appears.
Model Name
Press the Select Key to move the cursor to the desired
character’s position.
Press the IncreaSe or DecreaSe key to select the
desired character.
To Enter the Model Name Function
[MODEL NAME]
MODEL 1 ACRO
PPM <JR-PROPO>
≥
Press to enter main screen
Press to enter MODEL NAME
INCREASE and DECREASE key