ġ
4-6
4
4.4 RANGE ADJUSTMENT
Make adjustment so that the range of a target on the radar display is shown correctly.
Procedures 1. Search the radar display for a target of
which range is already known.
2. Open the Equipment Setup Menu.
3. Press [2] key.
The Code Input Menu will appear.
4. Using numeric pad, enter the value and
then press “ENT” button, and press
“EXIT” button to determine the value.
The multi-function control can also be used to enter
the value.
5. Repeat step 4, and adjust until the target
range measured in step 1 and the range
on the radar display become identical.
To Next Page
Loading...
Need help?
General
