JRC JMR-5404-X - Switching the Motion Mode

Section 2 Basic Operation 2-14
2.11 Switching the Motion Mode
By setting a motion mode, the display method of the own ship’s position on the radar screen can be
changed.
Switching relative motion (RM) mode to true motion (TM) mode
1 Click on the Motion Mode combo box in Range and mode information.
2 Select the motion mode.
Memo
Available combinations vary depending on the settings of the motion mode and the
azimuth mode (refer to "2.10 Switching the Azimuth Mode").
Azimuth mode
Motion mode
N UP H UP C UP C UP
(Angle Setting)
TM

×


RM(T) or RM(R)
   
Motion Mode combo box