JRC JMR-5404-X - Adjusting Screen Brightness; Adjust the Screen Using the Right Tool Bar; Adjust the Screen Using the [MULTI] Dial

2-3 Section 2 Basic Operation
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
1
2.3 Adjusting Screen Brightness
2.3.1 Adjust the screen using the right tool bar
1 Click on the [Display and Panel Brightness] button on the right toolbar.
The brightness adjustment buttons of the screen and the operation unit are displayed.
Adjust the brightness of the screen on the left side.
2
Adjust the brightness by using the [Light] button and [Dark] button.
Whenever the [Light] button/[Dark] button is clicked on, the brightness changes by one level.
2.3.2 Adjust the screen using the [MULTI] dial.
If the [MULTI] dial is operated while [Display Brightness] function is selected as the [MULTI] dial
assignment function, the [Display Brightness] dialogue is displayed.
It is possible to adjust the brightness of the display section by rotating the [MULTI] dial.
Memo
When "DISP Brightness" is not being displayed in the Key Assignment Indication Area, press the
[MULTI] dial for a long time.The Display Brightness function will be assigned to the [MULTI] dial.