JRC JMR-5404-X - Deactivating an AIS Target

Section 4 AIS Operation 4-4
4.4 Deactivating an AIS Target
Deactivates an AIS target and clear the display of the vector and heading line.
[Deactivating one AIS target]
1 Right-click on the AIS target to be deactivated.
The setting items for cursor modes are displayed.
2 Click on the [Deactivate] on the Context menu.
The selected AIS target is deactivated.
[Deactivating multiple AIS targets]
1 Right-click on the AIS target.
The setting items for cursor modes are displayed.
2 Click on [Deactivate mode] on the Context menu.
The cursor changes to the selection cursor.
3 Click on the AIS target to be deactivated.
The selected AIS target is deactivated.
Memo
This operation is available only for an activated AIS target.