JRC JMR-5404-X - Displaying the Information of Tracking Targets

3-3 Section 3 Operation of Target Tracking
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
1
3.2 Displaying the Information of Tracking
Targets
1 Set the cursor mode to the AUTO mode.
2 Click on the target of tracking whose numerical value is to be displayed.
Numeric data for the specified target is displayed in the information monitoring window.
The symbol display is changed to " ". The target data will remain on the radar display until
the target is lost and its vector disappears, or until another target is designated.
If a target with the mark " " is designated, only its true bearing and range appear until its
vector appears.
Cancellation of numeric data display
1 Set the cursor mode to the AUTO mode.
2 Place the cursor on the tracked target to cancel numeric value display and then click
on.
The numeric value disappears.