JRC JMR-5404-X - Finishing and Stopping Operation

Section 2 Basic Operation 2-2
2.2 Finishing and Stopping Operation
1 Click on the Standby/Transmit switch button in Radar system information.
Radar transmission stops and the rotation of the radar antenna stops.
The display of the Standby/Transmit switch button changes from "Transmit" to "Standby".
Memo
If observation using the radar is being scheduled within a comparably short period of time,
keep this state. Observation can be started immediately by just
clicking on the
Standby/Transmit switch button.
2 Press the Power button on the operation unit.
The power to this equipment is turned OFF.
Power button
Please press the 2 keys
simultaneously.