JRC JMR-611 - Screen Capture; Screen Capture Setting (Select Card Slot)

3-46
3.7 SCREEN CAPTURE
Do not turn the system off while the display shows “Copying” in a message
area on the bottom center of the screen in order not to make a flash memory
card damaged.
3.7.1 Screen Capture Setting (Select Card Slot)
Flash memory card (CF card) is necessary for screen capture function (Save, Erase, Capture).
This system has two card slots, and this setting is to select which slot is used for this function.
Procedures 1 Insert a flash memory card into the card slot.
Flash memory card is necessary.
For the insertion and removal of the card, see HOW TO INSERT AND REMOVE A
CARD in the appendix.
2 Press [MENU] key.
Select 8.Next and press [ENTER] key.
Select 1.Screen Capture Setting and press [ENTER] key.
3 Select 1.Select Card Slot and press [ENTER] key.
Slot1 and Slot2 of the Select Card Slot items are switched.
4 Select 1.Slot1 or 2.Slot2 and press [ENTER] key.