10.5 OUTPUT SIGNAL
(1) The signal for Slave Display TIY, VD, BP (2048 pulse), BZ
(2) Navigation information RADAR system data: RSD
Own ship data: OSD
(3) External alarm Point-of-contact signal normal close.
Max current : 200mA.
(4) 2ND monitor Analog RGB HD 15pin connector 1pcs
(DVI connector 1pcs.)
(5) AIS ACK.
(6) LAN 100Mbps(100BACE-TX)
Radar screen UDP/IP Multi cast.
Sweep/quadrant /full screen/block
Radar control TCP/IP Uni cast.
All the operation except power on/off.
10.6 STANDARD EQUIPMENT
COMPOSITION
Scanner unit: 1
Process unit: 1
Operation unit: 1
Spare parts: 1
Instruction manual:1
10.7 DISTANCE BETWEEN UNITS
Standard
Monitor-processor unit 5m
Keyboard-processor unit 7m
Scanner-processor unit 20m
To Next Page
Loading...
