iii
ەPRECAUTIONSە
DANGER
Never conduct inspection or repair work of equipment components.
Inspection or repair work by uncertified personnel may result in fire hazard or
electrocution.
For inspection and repair work of equipment components, consult with our
branch office, branch shop, sales office, or our distributor in your district.
When conducting maintenance, make sure to turn the main power off.
Failure to comply may result in electrocution.
Turn off the main power before cleaning the equipment. Especially when a
rectifier is used, make sure to turn it off since voltage is still outputted from the
rectifier even after the indicator and the radar are turned off. Failure to comply
may result in equipment failure, or death or serious injury due to electric
shock.
When conducting maintenance work on the antenna, make sure to turn its main
power off.
Failure to comply may result in electrocution or injuries.
Make sure to turn off the antenna operation switch. Failure to comply may result
in injuries caused by physical contact with the rotating antenna.
FCC RF EXPOSURE STATEMENT
THIS UNIT COMPLIES WITH FCC RF EXPOSURE LIMITS FOR AN
UNCONTROLLED ENVIRONMENT. TO COMPLY WITH FCC RF EXPOSURE
LIMIT REQUIREMENTS, ANTENNAS MUST BE OPERATED MORE THAN AT A
MINIMUM DISTANCE. KEEP TO MORE THAN THE MINIMUM DISTANCE
WHICH IS BETWEEN THE RADIATOR AND ANY PERSON’S BODY. THE
MIMIMUM DISTANCE IS FOLLOWING.
RADIATOR TYPE LENGTH MIMIMUM DISTANCE
NAX-16R-6 6ft 308.4 cm
NAX-16R-7 7ft 322.9cm
NAX-16R-9 9ft 379.4cm
To Next Page
Loading...
