10.3 CONTROL UNIT(NCM-994)
10.3 CONTROL UNIT(NCM-994)
(1) Mounting Table mounting
(2) Video Output RGB, H-sync and V-sync (SXGA)
(5) Variable range marker Digital read-out on the screen (4 characters) 2 kinds of VRM
(6) EBL Digital read-out on the screen (4 characters) 2 kinds of EBL
(7) Cursor Range, Bearing, and Lat./Lon.
(8) Dimension Processing Keyboard
Height: approx. 170mm 45mm
Width: approx. 360mm 290mm
Depth: approx. 340mm 123mm
(9) Mass Processing Keyboard
approx. 6.9kg 1.0kg
(10) Tune mode Auto/manual mode
(11) STC only manual mode
(12) FTC only manual mode
(13) IR 3 levels
(14) Bearing scale 360°scale graduate at intervals of 1°
(15) Ship’s heading marker Electric flash line suppressible while pushing key
Ship’s stern marker can be displayed.
(16) P-Line 2 Parallel line
(17) Off center 3steps +60%,40%,20% of effective radius.
(18) Trails Relative trails / True trails
Trails length: OFF/2 scans/15/30sec/1/2/3/4/5/6min and continuation.
Any time possible to select the said article.
(19) Pulse length short/long (2, 4, 8km)
(20) Expansion OFF/FAIR/STRONG
(21) display color Radar echo: 16 level (yellow, green, amber, white)
Background (PPI): black, blue, dark gray
Background (outside of PPI): black, gray, dark gray, bright blue
Trails: 16 level (yellow, amber, white, bright blue, green)
Character/Dial: green, amber, white, yellow,
VRM1/VRM2: cyan, green
Own ship mark/ other ship mark: cyan, gray, magenta, green, white