14
Remov Pg fm Grp?
Enter
Pager #
Enter **1234********#
Which
Group? XX
Enter Group XX
Which
Pgr?NNNN
Enter Pager NNNN
NNNN out
Of Gp.XX
Remove a Pager from a Dynamic group.
Removes a Pager from an existing Dynamic Group.
See Add a Pager to a Group and Groups for more informa-
tion.
To repeat the remove Pager operation, press # again.
To Exit, press * button.
NNNN=Pager Number
XX =Pager Group
Add Pagr to Grp?
Enter
Pager #
Enter **1234*******#
Which
Group? XX
XX=Pager Group
Enter Group XX
Which
Pgr?NNNN
Enter Pager NNNN
1=POC Vb
2=Glwstr
Enter #
3=Numerc
4=Alpha
Enter Selection S#
Group XX
YYYY ZZZ
Adds a Pager to a Dynamic Group.
A Dynamic Group is 2 or more Pagers which are linked
together by the transmitter user. This link is done by the
Transmitter, with the information being entered through the
keypad. Once linked, a single (Group) page can be used to
page 2 or more Pagers. When a Group page is sent, the
Transmitter will page each Pager sequentially.
See Group Page for more information.
The Transmitter has the ability to hold 90 different Dynamic
Groups and a total of 500 Pager numbers.
Dynamic numbers are 10-99.
Group numbers 1-9 are reserved for factory use and cannot
be programmed at the Transmitter keypad.
Groups may have mixed Pager types.
Example: If Pager 2134 Numeric was input into group 88,
display will show:
Group 88
2134 Num
To repeat the add Pager to group operation, press #
again.
To Exit, press * button.
Until a Group Page is complete, the Transmitter cannot be
used for other pages. Time to complete a Group page
increases with the number of Pagers within that group.
S = Selection1-4: 1=Pocsag Vibe/Tone Page
2= Glowster/CommPass
3=Numeric Pager
4=Alphanumeric Page
XX=Group Number NNNN=Pager ZZZ= Pager Type
Remove a Pager From a Group Add a Pager To a Group
To Next Page
Loading...
