EasyManuals Logo

JTS CS-1 Bcb875981654857854272D12C04C

JTS CS-1
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
11
5. Operation
5.1 System testing
1) Pressing the “Set” button over 1.5 seconds, the Date | Set
area on the LCD Display will ash and show “Set”.
2) Press “Up” or “Down” button to choose “System Test”
on the Mode Status area of the LCD Display.
3) All connected chairman and delegate units will light up.
5.2 Date | Time Setting
1) Pressing the “Set” button over 1.5 seconds, the Date |
Set area on the LCD Display will ash and show “Set”.
2) Press “Up” or “Down” button to choose “Set Date
Time” on the Mode Status area of the LCD Display.
3) Press “Set”, The “Year” will ash, press “Up” or
“Down” button to select.
4) Repeat the action 3) to set up “Month” ,“Date”, “Hour”,
and “Minute.
5) Press the “Set” button to save the settings.
5.3 Key Lock
1) Pressing the “Set” button over 1.5 seconds, the Date |
Set area on the LCD Display will ash and show “Set”.
2) Press “Up” or “Down” button to choose “KeyLock” on
the Mode Status area of the LCD Display.
3) All buttons will be deactivated.
4) Repeat above action again to unlock..
3...25
SET SET

Other manuals for JTS CS-1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JTS CS-1 and is the answer not in the manual?

JTS CS-1 Specifications

General IconGeneral
BrandJTS
ModelCS-1
CategoryConference System
LanguageEnglish

Related product manuals