Need help?Do you have a question about the JTS CS Series and is the answer not in the manual?
General| Brand | JTS |
|---|---|
| Model | CS Series |
| Category | Conference System |
| Language | English |
Essential safety guidelines for connecting, operating, and placing the devices.
Describes the innovative CS-1 i-Conference Discussion System and its main components like CU, delegate, and chairman units.
Covers CU front/rear panels, recording signals, LCD, and USB port.
Details gooseneck mic, headphone sockets, volume, indicators, and buttons for CS-1CH/DU.
Procedures for installing the CS-1CHF and CS-1DUF discussion units on a desktop or embedded.
Instructions for connecting delegate and chairman units to the CU using 7-pole cables.
How to connect multiple CUs to expand the system up to 150 units.
Guides on connecting external microphones to the CU via XLR input.
Instructions for connecting wireless microphone receivers to the CU's XLR input.
Connect external recorders or use the CS-1CUR's built-in USB recording function.
Connecting PA systems or other audio devices via the CU's line input/output.
How to connect a telephone coupler to the CU for telephone network integration.
Connecting equalizers or effects units via RCA cables to the insertion input/output.
Instructions for connecting the power cord and turning on the system.
Steps to perform a system test using the 'Set' and 'Up/Down' buttons on the CU.
Guide for setting the date and time on the CU's LCD display.
How to lock and unlock all buttons on the CU using the 'Set' and 'Up/Down' buttons.
Instructions for using the built-in counter function on the CU.
How to operate the delegate unit, including microphone ON/OFF control.
How to operate the chairman unit, including microphone ON/OFF and priority button functions.
How to adjust the loudspeaker volume for delegate and chairman units using the CU.
Adjusting headphone and internal speaker volume on the CU.
Connecting headphones to the units and adjusting volume.
Setting and using the 'Open mode' where microphones can be activated freely.
Setting and using the 'Time mode' where microphones activate for a set duration.
Setting and using the 'Override mode' where only one delegate unit can be active.
Setting and using the 'Chairman only mode' where only chairman units are active.
Detailed steps for using the built-in recording function with USB drives.
Electrical and electro-acoustical specifications for the CS-1CU.
Frequency response, polar pattern, SPL, and gooseneck length for microphones.
Dimensions and weight for CS-1CU, CS-1CH/DU, and CS-1CHF/DUF units.
Environmental conditions (temperature, humidity) and safety standards.
Pin assignments for Trunk Connections, External Microphone (XLR), CINCH, Power, and Headphone connectors.
To Next Page
