JTS CS Series - 4.4 Connecting Wireless Microphone; 4.5 External and Built-in Recording

12
Caution:
Always use the microphone with balanced output.
The microphone XLR input provides a 12V phantom
power supply.
4.4 Connecting a wireless microphone
1) Connect a wireless receiver to the microphone
XLR input of CU.
2) Adjust the sensitivity by using the gain control 1
*CS-1CU
*CS-1CU
4.5 External recording and playing
1) Connect a recorder to the recorder input and output
by two pairs of RCA cable.
2) Adjust the sensitivity by using the gain control 1