JTS CS Series User Manual

15
4.9 Connecting power cord
1) Using the supplied power cord set to connect the
CU to the power supply socket.
2) Press Power ON/OFF switch to turn on the system.
As soon as the power is on, the LCD Display will
light up.
Equalizer
*CS-1CU
*CS-1CU
5. Operation
5.1 System testing
1) Pressing the “Set” button over 1.5 seconds, the
Date | Set area on the LCD Display will ash and
show “Set”.
2) Press “Up” or “Down” button to choose “System
Test” on the Mode Status area of the LCD Display.

JTS CS Series Specifications

General

Brand	JTS
Model	CS Series
Category	Conference System
Language	English