15
5.10 Open mode
1) Pressing the “Set” button over 1.5 seconds, the Date | Set
area on the LCD Display will ash and show “Set”.
2) Press “Up” or “Down” button to choose “Open Mode”
on the Mode Status area of the LCD Display.
3) Press “Set” button again, the number on simultaneously
user number will ash.
4) Press “Up” or “Down” button to choose the simultane-
ously user number (1,2,3,4).
5) Press “Set” button to save the changes.
Under “Open mode”, press the microphone ON/OFF push-
button on chairman and delegate units will activate the
microphone.
Press again will deactivate it.
5.11 Time mode
1) Selecting the “Time mode” and simultaneously maxi-
mum user number as the 5.10 procedures.
Under “Time mode”, press the microphone ON/OFF push-
button on delegate units will activate the microphone for 30
seconds.
If the number of active delegate units is smaller than the
maximum user number, press again will activate it for
another 30 seconds.
1..4 1..4
SET SET
1..4 1..4
SET SET
To Next Page
Loading...
Need help?
General
