JUKI HZL-X Series - 6-19 Knee lifting wire

– 30 –
6-19 Knee lifting wire
○
Remove the face cover, the thread tension cover and the spool cover.
Adjustmentprocedure
 1.Assemblethekneeliftinglever
1
.
2. Loosen the locknut
3
.Adjustthewire
4
so that the height of presser foot
2
becomes12
+1
-0.5
mm when
you fully turn the knee lifter lever
1
in the direction of the arrow until it will go no further.
3. Tighten the locknut.
12
+1
mm
-0.5
2
1
3
4
Goes
up
Comes
down