JUKI HZL-X Series - Principal Parts

– 4 –
[3] Principal parts
Lockstitchbutton
Hand wheel (pulley)
Power switch
Machine-socket-inlet
Foot-controller-jack
Spool cap (large)
Spool pin
LCD Screen
Operational
buttons
Face cover
Threading lever
Start/stopbutton
Auxiliarybed
(accessory case)
Presser foot lifting lever
Dropfeedknob
Needle setscrew
Needle
Presser foot
Sensorpinholeforbuttonholing
Presserfootreleasingbutton
Feed dog
Throat plate
Hook cover
Bobbinwinding
shaft
Hookcoverreleasebutton
Presser foot holder setscrew
Presser foot holder
Threadtrimmingbutton
Hard case
Widetable
* Do not put heavy ob-
jects onto hard case
and wide table.
* Do not remove the
styrene foam tted
inside the hard case.
If it is removed, the
sewing machine can
be damaged when it
is placed in the hard
case or other prob-
lems can occur.
Thread cutter
Reverse stitch
button
Speed controller
Needleup/downbutton
Presserfootpressureadjustmentdial
Thread tension
adjustmentdial
Knee lifting lever
hole
Light under arm
DX7 Only
DX7 Only
Presserfootautoliftbutton
Straight stitch slide plate
Straight stitch slide plate lever