To Next Page

To Previous Page

– 2 –

(8) Pattern selection

• 10-pattern direct selection: MENU key + Numeric keys

• Dot-matrix LCD

(9) Number of patterns that can be selected

• Max. 70 patterns

(10) Number of patterns

• HZL-DX7 : 300

• HZL-DX5 : 200

(11) Automatic threading device

•Thehooksectionmakesaturnbyloweringthethreadinglever,andautomaticallyreturnstoitsoriginalposition

after completion of threading.

(12) Automatic lock stitch

WhenthebacktackingswitchisturnedON:

• Straight stitch: Three stitches are sewn in normal direction and three stitches are sewn in reverse direction at

thebeginningandend(thereverseswitchisturnedON)ofsewing.

Amount of feed: Same with the preset amount of feed

• Other patterns: Zero-feed is inserted and one each stitch is sewn in the normal and reverse directions at the

beginningandend(thereverseswitchisturnedON)ofsewing.

Amount of feed: Fixed at 0.6 mm

(13) Buttonholing

Auto-returntypefullautomaticbuttonholing

Buttonholing size detection

(14) Save and call patterns

Selectedpatternsandpatternsettingscanbestoredinmemory.

Inaddition,thepatterncanbecalledupfrommemoryforsewing.

Numberofpatternsthatcanbestoredinmemory:10(folders)

(15) Helpful messages

• Presser foot lifting lever

• Buttonholing foot

• Display of pattern storage limitation

• Pattern clear prompt

• Memory storage

• Acceptance of setting change

• 2-needle setting

• Motor lock

• Straight stitch selection

JUKI HZL-X Series User Manual

Questions and Answers: