13
Button and display Description
A THREAD CLAMP button Effective/ineffective of the thread clamp is selected.
：
Thread clamp ineffective
：
Thread clamp effective
*
When the prohibition of thread clamp is set with memory switch
U35, the thread clamp button is not displayed.
B PRESSER DOWN button Presser can be lowered and the presser down screen is displayed.
To raise the presser, press the presser up button which is displayed
in the presser down screen.
C RETURN TO ORIGIN button This button returns the presser to the start of sewing and raises the
presser at the time of temporary stop.
D X ACTUAL SIZE VALUE display Actual size value in X direction of sewing shape being selected is
displayed.
E X SCALE RATE display Scale rate in X direction of sewing shape being selected is displayed.
F SEWING SHAPE No. display Kind and No. of sewing shape being selected at present are
displayed.
There are three kinds of sewing shapes below.
：
Standard pattern
：
LK-1900 pattern
：
Users' pattern
G SEWING SHAPE display Sewing shape being selected at present is displayed.
H SEWING SHAPE Total number of
stitches display
Total number of stitches of the sewing shape being selected at
present is displayed.
*
It is displayed only when the sewing shape being selected is the
standard pattern.
I NEEDLE THREAD TENSION
SETTING button
Needle thread tension value which is set to the pattern data being
selected at present is displayed on this button and when the button is
pressed, the item data change screen is displayed.
→
Refer to
.
6. PERFORMING ITEM DATA CHANGE, p.21.
J COUNTER VALUE CHANGE
button
Existing counter value is displayed on this button. When the button is
pressed, the counter value change screen is displayed.
→
Refer to
12. USING COUNTER, p.34.
To Next Page
Loading...
