JUKI MO-4s - Using the machine; Handwheel; Presser foot lifter; Changing the presser foot

18
A
R(
$
D%%
H&%
The handwheel turns
counterclockwise.
To raise the presser foot, raise
the lever on the rear of the
machine until it engages.
- Switch the machine off " O ".
- Raise the presser foot.
Press the catch (A) to release the
presser foot from the clamp. Raise
the presser foot lifter to the highest
position and remove the presser foot
sole to the left. To attach the presser
foot sole, place it under the shaft.
The groove in the shaft should line
up exactly with the presser foot pin.
Lower the shank and the presser
foot will engage automatically.