−7 −
13 Special machine code
Special classification of machine, structure and
specification other than gauge set
0 Standard
6 Feed dog provided with a lip
7 Upper looper high throw type
F For swim suits
H Upper looper extra high throw type
M For zipper
1 For splicing
15 to 18 Device and attachment code
G02/Q141 Presser foot/tape guide for attaching tape
G39/Q141 Presser foot (for sharp curve)/tape guide for
attaching tape
L121 Blind hemming ruler
S159 Swing type ruffler (pedal-interlocking type for safety
stitch)
S161 Swing type ruffler (Manual lever type for safety
stitch)
S162 Swing type ruffler (Manual lever type for overlock)
N077 Four-fold binder
* The general export specification is for Hong Kong, U.S.A., Japan and Singapore.
20 Machine head code
A Standard machine head
(Common to all specifications)
21 Accessory code
A
For general export
*
B For JE
G For China
22 Machine head code
0 Fully-sunken type
1 Semi-sunken type
The numberings after “–” (hyphen) of 19th figure will be used on
and after April 1, 2002. They are not described on the catalogue or the like.
To Next Page
Loading...
