JUKI MO-6000S series - Positioning the Upper Knife Arm Shaft; Positioning the Upper and Lower Knives, and Available Overedge Widths; Lower Knife; Upper Knife

−30 −
Standard Adjustment
(16) Positioning the upper knife arm shaft
The upper knife shaft should be positioned 34 mm above the top surface of the throat plate when it is
at its highest position.
MO-6 16S(R)-F 6-60H : 35 mm
(17) Positioning the upper and lower knives, and available overedge widths
1) Lower knife
2) Upper knife
3) Overedging width
Overedging width can be adjusted from 1.6 to 6.4 mm.
34 mm
Throat plate
Lower knife
Upper knife
1
2
34
1
2
3
0.5 to 1 mm