JUKI MO-6000S series - Position of the Thread Guides and the Looper Thread Take-Ups of MO-6900 G(J)

−66 −
Standard Adjustment
(40) Position of the thread guides and the looper thread take-ups of MO-6900G(J)
(Caution) The needle thread take-up shall be positioned at the lower dead point.
MO-6904G (J) MO-6914G (J) MO-6916G (J)
MO-6903G MO-6905G
Frame
Needle thread
guide
4mm
The thread hole in the needle thread
guide and the hooked portion of the
needle thread take-up are in the
position where 1/2 to the entire hole
in the needle thread guide cannot be
observed.
Frame
Needle thread
guide
Needle
thread
take-up
Approx. 2 mm
14.8mm
Needle thread take-up of
2-needle machine
Frame
Needle thread
guide of 2-needle
machine
The thread hole in the needle
thread guide and the hooked
portion of the needle thread take-
up are in the position where 1/2 to
the entire hole in the needle thread
guide cannot be observed.
Frame
Needle thread
guide
Needle
thread
take-up
10mm
2.5mm
Frame
Needle thread take-up of double-
chainstitch machine
The thread hole in the needle
thread guide and the hooked
portion of the needle thread take-
up are in the position where 1/2 to
the entire hole in the needle thread
guide cannot be observed.
16.5mm
15mm
3mm
1.8mm
15.8mm
Needle thread
guide
Needle thread
take-up
33mm
26mm
36mm
2.5mm
2mm