JUKI MO-6000S series - Adjusting the Height of the Feed Dog; Adjusting the Tillt of the Feed Dog

−24 −
Standard Adjustment
(11) Adjusting the height of the feed dog
The height of main feed dog 2 from the top surface of the throat plate 1 should be as follows when
it is at its highest posion.
Auxiliary feed dog 4 is 0.5 mm lower than main feed dog 2.
(12) Adjusting the tillt of the feed dog
Model Dimension A
MO-6 00S Series 1.0
MO-6904G Series 1.3
MO-6914G Series 1.2
MO-6916G Series 1.1
0.5 mm
Tilt of the feed dogs when the feed dogs
have come up most.
When the feed dog juts out the top surface of
the throat plate
A
B
Needle
entry
Top surface of
the throat plate
Feed dog is
leveled.
Model Dimension A Dimension B
MO-6 00S Series 1.0 (1.2)
MO-6904G Series 1.3 (1.5)
MO-6914G Series 1.2 (1.4)
MO-6916G Series 1.1 (1.3)
(Unit : mm)
Front up
1
2
3
A
Needle
entry
2
3
4
5
6
7
2
4
2
3
9
8
(Unit : mm)