JUKI SC-510 Engineer's Manual

−19 −
*
*
91
92
93
94
95
96
Function of compensating stitching when turning handwheel by hand
at the time of completion of constant-dimension stitching
0 : Function of compensating stitching is effective.
1 : Function of compensating stitching is prohibited.
Function to reduce speed at the time of completion of reverse feed
stitching at the start of sewing.
0 : Speed is not reduced.
1 : Speed is reduced.
Operation of needle up/down compensating switch is changed after
turning ON the power or thread trimming.
0 : Normal (needle up/down compensating stitching only)
1 : One stitch compensating stitching is performed only when
aforementioned changeover is made. (Upper stop / upper
stop)
Display function of input data is set.
0 : OFF
1 : ON
This function sets the machine head used.
For the details, refer to the data, which are separately described on
the sheet of Selecting procedure
of the machine head with SC-510 (40027864).
Max. number of rotation of the sewing machine head can be set.
* Setting varies in accordance with resistance pack to be connected.
Function of
prohibiting
compensation
operation after
turning
handwheel by
hand
Function of
reducing speed
of reverse feed
stitching at the
start of sewing
Function added
to needle up/
down
compensating
switch
Test display
mode
Selection of the
sewing
machine head
Setting of max.
number of
rotation of the
sewing
machine head
0/1
0/1
0/1
0/1
150 to MAX
(rpm)
95
93
0
92
0
91
1
* Do not change the set values with asterisk (*) mark as they are functions for maintenance. If the standard set value set at the time
of delivery is changed, it is in danger of causing the machine to be broken or the performance to be deteriorated.
(Descriptions of setting in this list are the standard values at the time of delivery.)
However, contents of function setting are subject to change for improvement of function and performance without notice.
89 0
0/1/2
0/1
0/1
Function of
pedal curve
selection
Tension
release
function
Initial UP stop
position move
function
Pedal curve is selected. (Improving pedal inching operation)
It is effective in combination with the machine head provided with
tension release function.
0 : Tension release function is ineffective.
1 : Tension release function is effective.
Automatic UP stop function is set immediately after turning ON the
power.
0 : OFF
1 : ON
0
2
1
Number of rotations
(rpm)
87
0
Pedal stroke (mm)
No.
Item
Description
Setting
range
34
34
35
35
35
35
35
Indication of
function setting
87
89
90
90
0
94
0
Waiting time of
start of reverse
revolution to lift
needle
Delay time from UP stop to start of reverse revolution at the time of
control of reverse revolution to
lift needle is set.
0 to 250
10 (ms)
86
10
Ref.
page
86
Start
level
S
U
U
S
U
U
U
S
S
U
(Start level ; U : User's mode, S : Service mode)
96
4000

JUKI SC-510 Specifications

General

Brand	JUKI
Model	SC-510
Category	Sewing Machine
Language	English