– 13 –
ENGLISH
(3) Special setting
For the thread trimming prohibiting function which is displayed in the front panel, it is possible to change the
set value by directly moving to the function setting mode while the power is turned ON in addition to the nor-
mal function setting procedure.
1
Thread trimming prohibition function setting
(Function setting No. 9)
Thread trimming operation at normal stitching
and overlapped stitching can be prohibited by se
-
lecting the thread trimming prohibition.
It is possible to change the set value with
switch
4
or
switch
3
.
0 : Thread trimming is effective.
1 : Thread trimming is prohibited.
Wh en "1" is selec ted, the
thread trimming prohibition
display lights up when the
mode is returned to the nor
-
mal one.
2
1
4
2
3
4
[ Moving procedure to the function setting mode ]
1) Hold pressing / switch
2
, and press
switch
4
to move to the function setting
mode.
(Caution) Function setting No. 9 is displayed imme-
diately after the changeover.
2) When returning to the normal mode, press /
switch
1
and determine the contents of the
setting.
To Next Page
Loading...
