JUKI SC-905 - Adjusting the Stroke of the Thread Draw-out Wire; Installing the Wiper Base

−42 −
(35) Adjusting the stroke of the thread draw-out wire
Standard Adjustment
(36) Installing the wiper base
Standard Adjustment
1
™ As observed from from the operator, the wiper should be leveled.
Wiper
Leveled
Wiper base
Auxiliary thread take-up
lever installing base
Thread draw-
out wire
Thread draw-out wire
installing base 2
Setscrew 1
Thread
Not to come in contact
with each other
Thread guide
Not to come in contact
with each other
Hexagon
wrench key
Thread guide