JUKI SC-905 - 4 Procedures of Disassembing;Assembling and Cautions; Adjusting and Assembling of the Gear Box (Large)

−48 −
4. PROCEDURES OF DISASSEMBING/ASSEMBLING AND CAUTIONS
(1) Adjusting and assembling of the gear box (large)
Procedures of disassembling/assembling
™ Loosen setscrews 1 and remove the gear
box cover.
™ Centering the horizontal feed cam
1) Loosen setscrew 3 in the horizontal feed
cam rod.
2) Loosen setscrews 2 in
the feed adjuster cover
and adjust so that
horizontal feed rod 4 can
smoothly move up or
down. Then tighten
setscrews 2.
3) Turn the handwheel and
tighten setscrew 3 in the
horizontal feed cam rod
while performing the
centering of the horizontal
feed cam.
Hook driving gear Feed adjuster
Feed adjuster cover
Horizontal feed cam
Horizontal
feed shaft
Horizontal feed cam
rod setscrew 3
1
1
1
1
1
1
1
1
1
1
1
1
2
Horizontal
feed cam
rod 4