2
Copyright © 2005
The Content of this manual is internationally protected for JULABO Labortechnik GmbH,
Seelbach, Germany. All rights are reserved. All information, including texts, pictures and other
content, may not be multiplied, distributed, transmitted, stored, passed on or put to use in any other
form without previous, explicit written authorization. Violation of this copyright will be prosecuted as
a criminal offense. Area of jurisdiction is Lahr, Germany.
IMPORTANT NOTE:
Repairs are to be carried out only by qualified service personnel authorized by
JULABO LABORTECHNIK GmbH.
Repaired units must comply with the applicable quality standard of JULABO
LABORTECHNIK GmbH.
The following information is to be included with orders for spare parts:
Order No.
part description,
barcode number of the unit.
Example:
Part description Order-No. Barcode No.
Mains switch 7.901. 0073 10277
In addition to the safety warnings listed above, warnings are posted throughout
the manual. These warnings are designated by an exclamation mark inside an
equilateral triangle. Read and follow these important instructions. Failure to
observe these instructions can result in permanent damage to the unit, significant
property damage, personal injury or death.