What to do if Julabo Air Conditioner recirculating cooler is operated without bath fluid?
If the Julabo Air Conditioner recirculating cooler is operated without bath fluid, or the liquid level is insufficient, replenish the bath tank with the bath fluid.
What to do if Julabo Air Conditioner tube breakage has occurred?
If tube breakage has occurred with your Julabo Air Conditioner (insufficient filling level due to excessive bath fluid pumped out), replace the tubing and replenish the bath tank with the bath fluid.
General| Brand | Julabo |
|---|---|
| Model | FL601 |
| Category | Air Conditioner |
| Language | English |
Explains the operation via keypad, microprocessor technology, and PID regulation.
Provides guidance on the proper disposal of electrical and electronic equipment.
Provides advice on handling, environmental conditions, and usage precautions.
Explains the meaning of warning, caution, and notice signal words.
Detailed safety instructions for installation, operation, and maintenance.
Instructions for correctly installing the recirculating cooler unit.
Guidance on selecting and securely attaching connecting tubing for the unit.
Overview and identification of all controls, indicators, and ports on the unit.
Step-by-step instructions for common operational tasks and procedures.
Recommendations and cautions regarding the selection and use of bath fluids.
Instructions for filling the recirculating cooler with tempering fluid.
Procedure for powering the unit on and off, and initiating/stopping operation.
Instructions on how to adjust and set the desired operating temperatures.
Describes the safety installation for preventing overheating.
Details the safety installation for preventing operation with insufficient liquid.
Steps for configuring the unit for remote communication.
Explains data transfer sequences and communication protocols with external systems.
A comprehensive list of commands for controlling the unit remotely.
Lists all possible error messages and their descriptions.
To Next Page
