JUMO EM Series User Manual

4 Mounting
22
NOTE!
The temperature probe must be immersed in the medium for its entire length, otherwise there will be ap-
preciable deviations from the switching point.
For connection types 20, 21 and 22/23, the temperature probe is fixed in the protective sleeve with the
clamping piece.
(1) Clamping piece
(2) Temperarture probe

JUMO EM Series Specifications

General

Housing Material	Plastic
Temperature Range	-50 to 400°C
Display	LCD
Power Supply	24 V AC/DC
Output	Relay, Analog
Input	Analog
Control Mode	PID, On/Off