JUMO EM Series User Manual

7
2 Introduction
You will find the Declarations of conformity at www.jumo.en.
• Products
• Temperature
• Monitor/Limiter
• Electromechanical
• Panel-mounting thermostats 602021
• Documentation
• Declaration of conformity/White Paper
Ask for them to be sent.
CAUTION!
Failure of the device
Cutting or kinking the capillary of the device leads to permanent failure of the functions!
Physical and toxicological properties of the expansion fluid that may escape in the event of a system
fracture.
NOTE!
At present, there is no restrictive statement from the health authorities concerning any danger to health
over short periods and at low concentration, e.g. after a fracture of the measuring system.
2.3 Identification marking
Depending on the version (for details see nameplate):
Control range
with end of scale
Dangerous
reactions
Fire and explosion hazard Water
contamination
Toxicological data
Ignition
temperature
Explosion limit Irritant Danger
to health
Toxic
< 200 °C No 355 °C 0.6 to 8 % v/v Yes Yes See note No
≥200°C
≤350°C
No 490 °C - Yes Yes See note No
>350°C
≤500°C
No No No No No No No
PED
Pressure
Equipment
Directive
®

JUMO EM Series Specifications

General

Housing Material	Plastic
Temperature Range	-50 to 400°C
Display	LCD
Power Supply	24 V AC/DC
Output	Relay, Analog
Input	Analog
Control Mode	PID, On/Off