Jungheinrich EJB 14 User Manual

0999.GB
E 4
3 Putting vehicle in operation
f
Before starting or operating the truck, or before lifting any loads, the driver has to
make sure that nobody is within the danger area.
Checks and actions before routine start-up
– Visual inspection for damages of the whole truck (especially tyres and load carrying
devices).
– Visual inspection of battery fixing and cable connections.
Starting up the truck
– Pull out master switch (1).
– Put key into the key switch (2) and turn right until stop to position "I".
The combined instrument (3) indicates the available battery capacity.
– Check function of horn (10).
– Check control shaft (4) for braking and driving function (see section 4.2).
The truck is now ready for operation.
0999.GB
E 4
3 Putting vehicle in operation
f
Before starting or operating the truck, or before lifting any loads, the driver has to
make sure that nobody is within the danger area.
Checks and actions before routine start-up
– Visual inspection for damages of the whole truck (especially tyres and load carrying
devices).
– Visual inspection of battery fixing and cable connections.
Starting up the truck
– Pull out master switch (1).
– Put key into the key switch (2) and turn right until stop to position "I".
The combined instrument (3) indicates the available battery capacity.
– Check function of horn (10).
– Check control shaft (4) for braking and driving function (see section 4.2).
The truck is now ready for operation.

Jungheinrich EJB 14 Specifications

General

Brand	Jungheinrich
Model	EJB 14
Category	Trucks
Language	English