Need help?Do you have a question about the Jungheinrich EJC B14 and is the answer not in the manual?
General| Brand | Jungheinrich |
|---|---|
| Model | EJC B14 |
| Category | Trucks |
| Language | English |
Defines the intended purpose and scope of the industrial truck's operation.
Details how the truck should be used, including load placement and handling.
Describes the EJC B14/B16 as a four-wheel, tiller-guided electric truck for lifting and transport.
Detailed explanation of the truck's safety, hydraulic, drive, tiller, and electrical systems.
Provides key performance metrics like rated capacity, speeds, and gradeability for EJC B14/B16.
Presents detailed dimensional data for the truck with diagrams.
Lists mast specifications (height, free lift, lift height) for different mast types.
Details net weight, axle loads, and battery weight for EJC B14/B16.
Explains the information found on the truck's data plate.
Indicates how to read the load chart for maximum capacity at given load centers and heights.
Essential safety rules for handling, maintenance, and disposal of lead-acid batteries.
Detailed instructions and safety warnings for charging the truck's battery using a stationary charger.
Step-by-step guide for safely removing and installing the truck's battery.
General safety rules for operating the forklift truck, driver authorization, and hazard areas.
Identifies and describes the truck's various displays and control elements.
Explains the LED colors and their meaning for battery charge status.
Procedures for daily checks and operations before starting the truck.
Rules for travel routes, work areas, conduct, visibility, and negotiating slopes/inclines.
Covers emergency stop, travel, steering, and braking systems.
Safety and procedures for lifting, moving, and placing load units.
Steps for safely picking up loads with the forks.
Lists possible causes and actions for a truck that fails to start.
Identifies reasons why the load handler may not lift and corrective actions.
Importance of regular servicing and definitions of maintenance intervals (W, A, B, C, *, t).
Detailed checklist of maintenance tasks categorized by system (Brakes, Electrical, Power Supply).
Maintenance procedures for hydraulic systems, including oil levels and filter replacement.
Safety warnings and procedures for handling flammable and poisonous consumables like oils.
Safety preparations required before starting maintenance or repair work.
Procedures for bringing the truck back into operation after maintenance.
Preparatory steps before taking the truck out of service, including cleaning and lubrication.
Requirements for periodic safety inspections and testing of the truck.
Instructions for Jungheinrich traction batteries with positive tubular plates.
Instructions for maintenance-free Jungheinrich traction batteries.
Daily, weekly, monthly, and annual maintenance tasks for batteries.
Safety requirements and operation for maintenance-free batteries.
To Next Page