EasyManuals Logo

Jungheinrich EJC B14 User Manual

Jungheinrich EJC B14
107 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
03.11 EN
14
2.2 Functional Description
Safety Mechanisms
An enclosed, smooth truck geometry with rounded edges ensures safe handling of
the truck.
The wheels are surrounded by a solid skirt.
Pressing the Emergency Disconnect rapidly cuts out all electrical functions in
hazardous situations.
Hydraulic system
Lifting and lowering are activated via the lift and lower buttons.
When lifting is activated, the pump unit starts to operate, supplying hydraulic oil
from the oil reservoir to the lift cylinder.
If the truck is fitted with a duplex twin-stage mast (ZZ) or a triplex telescopic mast
(DZ) a short, centre-mounted free lift cylinder initially lifts the load carriage (free lift)
without changing the overall height of the truck.
Drive system
A fixed DC motor actuates the drive wheel via a bevel spur gearbox.
The electronic traction controller ensures smooth drive motor speed control and
hence smooth travel, powerful acceleration and electrically controlled braking.
Tiller
All travel and lift operations can be performed sensitively without having to reach.
The driver steers with a tiller:
The drive system can be pivoted +/- 90°.
Electrical system
24 volt system.
Electronic traction control is standard.
Controls and Displays
Ergonomic controls ensure fatigue-free operation for sensitive application of the
travel and hydraulic operations.
The battery discharge indicator shows the available battery capacity.
Mast
The maximum strength steel sections are narrow, allowing for outstanding fork
visibility in particular with the three-stage mast.
The lift rails and the fork carriage run on permanently-lubricated and hence
maintenance-free angled rollers.
Fork tines
Alternatively, the truck can be fitted with 2A fork tines.
03.11 EN
14
2.2 Functional Description
Safety Mechanisms
An enclosed, smooth truck geometry with rounded edges ensures safe handling of
the truck.
The wheels are surrounded by a solid skirt.
Pressing the Emergency Disconnect rapidly cuts out all electrical functions in
hazardous situations.
Hydraulic system
Lifting and lowering are activated via the lift and lower buttons.
When lifting is activated, the pump unit starts to operate, supplying hydraulic oil
from the oil reservoir to the lift cylinder.
If the truck is fitted with a duplex twin-stage mast (ZZ) or a triplex telescopic mast
(DZ) a short, centre-mounted free lift cylinder initially lifts the load carriage (free lift)
without changing the overall height of the truck.
Drive system
A fixed DC motor actuates the drive wheel via a bevel spur gearbox.
The electronic traction controller ensures smooth drive motor speed control and
hence smooth travel, powerful acceleration and electrically controlled braking.
Tiller
All travel and lift operations can be performed sensitively without having to reach.
The driver steers with a tiller:
The drive system can be pivoted +/- 90°.
Electrical system
24 volt system.
Electronic traction control is standard.
Controls and Displays
Ergonomic controls ensure fatigue-free operation for sensitive application of the
travel and hydraulic operations.
The battery discharge indicator shows the available battery capacity.
Mast
The maximum strength steel sections are narrow, allowing for outstanding fork
visibility in particular with the three-stage mast.
The lift rails and the fork carriage run on permanently-lubricated and hence
maintenance-free angled rollers.
Fork tines
Alternatively, the truck can be fitted with 2A fork tines.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jungheinrich EJC B14 and is the answer not in the manual?

Jungheinrich EJC B14 Specifications

General IconGeneral
BrandJungheinrich
ModelEJC B14
CategoryTrucks
LanguageEnglish

Related product manuals