55
03.11 EN
6 Operating the truck without its own drive system
WARNING!
Uncontrolled truck movement
When the brakes are de-activated the truck must be parked on a level surface, since
the brakes are no longer effective.
XDo not release the brake on slopes or inclines.
XApply the brake again when you reach your destination.
XDo not park the truck with the brake released.
Releasing the brake
Requirements
– Park the truck securely, (see "Parking the truck securely" on page 44).
Tools and Material Required
– Two M5x42 screws
– Spanner wrench
Procedure
• Prevent the truck from rolling away.
• Lift up the front cover (17) and put it to one side, (see "Removing the front panel"
on page 79).
• Insert two M5x42 screws (52) as far as the stop and lift up the anchor plate.
The brake is now released and the truck can be moved.
Applying the brake
Procedure
• Unscrew the two M5x42 screws again.
• Refit the front cover (17).
Braking is now restored again.
52
55
03.11 EN
6 Operating the truck without its own drive system
WARNING!
Uncontrolled truck movement
When the brakes are de-activated the truck must be parked on a level surface, since
the brakes are no longer effective.
XDo not release the brake on slopes or inclines.
XApply the brake again when you reach your destination.
XDo not park the truck with the brake released.
Releasing the brake
Requirements
– Park the truck securely, (see "Parking the truck securely" on page 44).
Tools and Material Required
– Two M5x42 screws
– Spanner wrench
Procedure
• Prevent the truck from rolling away.
• Lift up the front cover (17) and put it to one side, (see "Removing the front panel"
on page 79).
• Insert two M5x42 screws (52) as far as the stop and lift up the anchor plate.
The brake is now released and the truck can be moved.
Applying the brake
Procedure
• Unscrew the two M5x42 screws again.
• Refit the front cover (17).
Braking is now restored again.
52
To Next Page
Loading...
Need help?
General
