Jungheinrich EJC B14 User Manual

41
03.11 EN
2.1 Battery discharge indicator
When the truck has been released via the key
switch, code lock or ISM, the battery charge status
is displayed. The LED (51) colours represent the
following conditions:
Z If the LED is red, load units can no longer be lifted. Lifting is only enabled again
when the battery connected is at least 70% charged.
If the LED flashes red and the truck is not ready for operation, inform the
manufacturer's service department. Red flashing is a truck controller code. The
flashing sequence indicates the type of fault.
LED colour Residual capacity
Green 40 - 100 %
Orange 30 - 40 %
Flashing
green/orange 1Hz
20 - 30 %
Red 0 - 20 %
51
41
03.11 EN
2.1 Battery discharge indicator
When the truck has been released via the key
switch, code lock or ISM, the battery charge status
is displayed. The LED (51) colours represent the
following conditions:
Z If the LED is red, load units can no longer be lifted. Lifting is only enabled again
when the battery connected is at least 70% charged.
If the LED flashes red and the truck is not ready for operation, inform the
manufacturer's service department. Red flashing is a truck controller code. The
flashing sequence indicates the type of fault.
LED colour Residual capacity
Green 40 - 100 %
Orange 30 - 40 %
Flashing
green/orange 1Hz
20 - 30 %
Red 0 - 20 %
51

Jungheinrich EJC B14 Specifications

General

Brand	Jungheinrich
Model	EJC B14
Category	Trucks
Language	English