27
03.11 EN
3 Using the Truck for the First Time
CAUTION!
Only operate the truck with battery current. Rectified AC current will damage the
electronic components. Cable connections to the battery (tow leads) must be less
than 6 m long and have a minimum cross-section of 50 mm².
Procedure
• Check the equipment is complete.
• If necessary install the battery, (see "Battery removal and installation" on page 35)
• Charge the battery, (see "Charging the battery" on page 33).
The truck can now be started, (see "Starting up the truck" on page 42)
NOTE
Cold store trucks
XTrucks designed for use in cold stores have a cold store hydraulic oil and a
protective frame instead of a mast guard on the mast.
XIf a truck with cold store oil is used outside the cold store, the lowering speeds may
increase.
4 Adjustment of wheel arms
The distance between the wheel arms is adjustable.
WARNING!
The adjustment of wheel arms must only be performed by a trained service
personnel.
27
03.11 EN
3 Using the Truck for the First Time
CAUTION!
Only operate the truck with battery current. Rectified AC current will damage the
electronic components. Cable connections to the battery (tow leads) must be less
than 6 m long and have a minimum cross-section of 50 mm².
Procedure
• Check the equipment is complete.
• If necessary install the battery, (see "Battery removal and installation" on page 35)
• Charge the battery, (see "Charging the battery" on page 33).
The truck can now be started, (see "Starting up the truck" on page 42)
NOTE
Cold store trucks
XTrucks designed for use in cold stores have a cold store hydraulic oil and a
protective frame instead of a mast guard on the mast.
XIf a truck with cold store oil is used outside the cold store, the lowering speeds may
increase.
4 Adjustment of wheel arms
The distance between the wheel arms is adjustable.
WARNING!
The adjustment of wheel arms must only be performed by a trained service
personnel.