To Next Page

To Previous Page

03.11 EN

8.3.2 Service hour display

Display range between 0.0 and 99,999.0 hours. Travel and lifting operations are

logged. This is a backlit display.

Z For maintenance-free batteries a “T” symbol is shown in the hourmeter

display (69).

8.3.3 Error messages

The service hour display is also used for indicating errors. The display starts with a

"C" for component and a three digit component number. The error display starts with

an ”E” for Error and a three digit error number.

If several errors occur simultaneously they are displayed one after the other. The

errors are displayed until they are rectified. Error messages overwrite the service

hour display. Most errors cause the Emergency Stop to be triggered. The error

display remains until the control circuit is switched off (key switch).

Z The manufacturer’s service department has detailed component descriptions with

error codes.

8.3.4 Power up test

On power up the display shows:

– The software version of the display instrument (briefly),

– The service hours,

– The battery charge status.