03.11 EN
30
WARNING!
Batteries can be hazardous
Batteries contain an acid solution which is poisonous and corrosive. Above all avoid
any contact with battery acid.
XDispose of used battery acid in accordance with regulations.
XAlways wear protective clothing and goggles when working with batteries.
XDo not let battery acid come into contact with skin, clothing or eyes. If necessary,
rinse with plenty of clean water.
XCall for a doctor immediately in the event of physical damage (e.g. skin or eye
contact with battery acid).
XNeutralise any spilled battery acid immediately with plenty of water.
XOnly batteries with a sealed battery container may be used.
XFollow national guidelines and legislation.
WARNING!
Using unsuitable batteries can cause accidents
The weight and dimensions of the battery have a considerable effect on the
operational safety and capacity of the industrial truck. Changing the battery features
requires the manufacturer’s approval, as compensating weights are required if
smaller batteries are fitted. When replacing/installing the battery make sure the
battery is securely located in the battery compartment of the truck.
Park the truck securely before carrying out any work on the batteries ((see "Parking
the truck securely" on page 44)).
03.11 EN
30
WARNING!
Batteries can be hazardous
Batteries contain an acid solution which is poisonous and corrosive. Above all avoid
any contact with battery acid.
XDispose of used battery acid in accordance with regulations.
XAlways wear protective clothing and goggles when working with batteries.
XDo not let battery acid come into contact with skin, clothing or eyes. If necessary,
rinse with plenty of clean water.
XCall for a doctor immediately in the event of physical damage (e.g. skin or eye
contact with battery acid).
XNeutralise any spilled battery acid immediately with plenty of water.
XOnly batteries with a sealed battery container may be used.
XFollow national guidelines and legislation.
WARNING!
Using unsuitable batteries can cause accidents
The weight and dimensions of the battery have a considerable effect on the
operational safety and capacity of the industrial truck. Changing the battery features
requires the manufacturer’s approval, as compensating weights are required if
smaller batteries are fitted. When replacing/installing the battery make sure the
battery is securely located in the battery compartment of the truck.
Park the truck securely before carrying out any work on the batteries ((see "Parking
the truck securely" on page 44)).