Need help?Do you have a question about the Jungheinrich ESE 220 and is the answer not in the manual?
General| Brand | Jungheinrich |
|---|---|
| Model | ESE 220 |
| Category | Trucks |
| Language | English |
General guidance and model-specific information for operating the truck.
Explanation of warning symbols and their associated meanings.
Proper usage, operation, and servicing guidelines for the industrial truck.
Environmental and operational limits for safe and intended use of the truck.
Duties of the owner/operator company for safe truck operation.
Overview of the truck's design, features, and intended purpose.
Detailed explanation of truck components and their functions.
Key performance metrics like speed, lift height, and motor output.
Physical measurements and diagrams of the truck models.
Compliance with relevant European standards for noise and vibration.
Safe procedures for lifting the truck using crane equipment.
Guidelines for securing and transporting the truck on vehicles.
Initial setup and commissioning steps for a new truck.
Crucial safety rules for battery maintenance and handling.
Procedures and safety precautions for charging the truck's battery.
Safe methods for removing and installing the battery.
General safety rules for operating the industrial truck.
Identification and function of all truck controls and displays.
Pre-operation checks and startup procedures.
Procedures for safely parking the truck.
Rules for safe travel, visibility, and load handling.
Function and use of the emergency stop switch.
How to operate the truck's travel functions.
Explanation of service and regenerative braking systems.
Procedures for safe load handling.
Potential causes and remedies for startup failures.
Troubleshooting steps for issues with lifting loads.
Understanding the truck's display and control interface.
Using the keypad for code entry and truck operation.
General safety and environmental considerations during maintenance.
Rules for personnel and procedures during maintenance.
Guidelines for safe handling of lubricants and lubrication points.
Safe methods for cleaning the truck and its components.
Scheduled maintenance tasks for the ESE 220 model.
Points to check during standard equipment inspections.
Guidelines for proper battery usage and warranty.
General safety guidelines for battery handling.
Procedures for commissioning and operating batteries.
Guidelines for storing batteries properly.
To Next Page